H) Order procedures 1) Cash & Carry ( ex-factory )
2) Formal PO issuance :- Step 1 ) , Issue PO and e-mail to ( firstname.lastname@example.org ) . ( follow quotation number above in your PO , Leadtime : Within 1 ~ 7 working days ) ( * subject to GSe stock level )
Step 2 ) Contact / e-mail GSe Sales office for proforma invoice and payment arrangement in advance before collection . Disclaimer : * Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us . The Information provided on this website best advise our customers corresponds to current electrical matting standards . In the individual case it is the sole responsibility of the customer to evaluate requirements , in particular if specified properties are sufficient for use .
A) Which product is the correct Electrical Insulating Rubber Matting for protection against electric shock risk ? B) Choose the correct class based on your overall voltage requirements. C) BS EN 61111:2009 ( IEC 61111:2009 ) is the latest standard for electrical insulating rubber matting in providing electrical protection by classes defined.
A) Product Name Model : GS-SMG ( Medium High Voltage ) , Diamond Switchboard Matting / Non Conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat
B) Raw Material : NATURAL RUBBER ( NR ) BASE POLYMER
C) Purpose Switchboard matting is a non-conductive high density rubber compound engineered to prevent electric shock around high voltage equipment. The non-conductive rubber compound creates an insulating barrier between the electrical source and ground.
D) Scope Our GS-SMG ( Medium High Voltage ) is under IEC 61111:2009 Class 3 , Ideal for Dielectric Voltage / Withstand Voltage : 40,000 VAC and Recommended Maximum use Voltage : 26,500 VAC ( High Voltage Switchboard Matting )
E) Characteristics 1) Brand : GSE ® ( eRubber and Heat Insulation Mall ™ ) 2) Model : GS - SMG ( Medium High Voltage ) , Switchboard Matting / High Voltage Insulation Rubber Mat 3) Top Surface - Anti Slip Diamond , with anti slip diamond surface to provide safe working environment , pattern surface “grabs” the bottom of footwear, improving traction and safe from slippery . 4) Colour : Grey 5) Test Certificate : Tested by 3rd Party Accredited Laboratory ( BS EN 61111 : 2009 Clause 126.96.36.199 ) 6) Product Compliance Status :-
A) BS EN 61111 Clause 188.8.131.52 Class 3 , Voltage Withstand Test
B) Comply to RoHS I & II ( RoHS Compliant Product ) , RoHS , short for Restriction of Hazardous Substances . On 4th June 2015, Commission Directive (EU) 2015/863 was published in the Official Journal of the European Union (OJEU) to include the phthalates ( BBP, DBP, DEHP and DIBP, these are used to soften PVC and Vinyl products ) into ANNEX II of the RoHS Recast Directive.
The new law restricts each phthalate to no more than 0.1% ( mg/kg = ppm ; 0.1wt% = 1,000ppm ) in each homogeneous material of an electrical product.
F) Specification 1) Nominal Thickness : 5mm A) Model : GS-SMG , Switchboard Matting, ( Grey colour ) , 5mm Tk x 1,000mm (1 m ) Width x 6,000mm (6m) Length / roll ( Approximately ~38kgs / pc )
" GENUINE / IDENTIFICATION MARK “
1) Model , Lot No. , Nominal Maximum Use Voltage , IEC 61111:2009 Class , Test Certificate Number and colour code labelling .