Top
( 1.0 × 10 ⁷ ~ 1.0 × 10⁹ Ohms )
( 1.0 × 10 ⁷ ~ 1.0 × 10⁹ Ohms )
Bottom
( 1.0 × 10 ² ~ 1.0 × 10 ⁶Ohms )
( 1.0 × 10 ² ~ 1.0 × 10 ⁶Ohms )
GENERAL PURPOSE ESD ( ANTI STATIC )
RUBBER MATSWHY SHOULD WE BE CONCERNED ABOUT THE IMPACT OF ELECTRO-STATIC DISCHARGE ?
WHY ANTI STATIC CARPETING FOR YOUR FACILITY ?
REASON IS TO PREVENT TRIBOELECTRIC DAMAGING OUR MACHINES / EQUIPMENTS / ELECTRONIC PARTS etc
ElectroStatic Discharge Materials ( ESD Rubber ) - European Union ( EU ) RoHS Directive 2002/95/EC Compliant
Copyright © GSE ONLINE SDN BHD ( 1116968-P ) ALL RIGHTS RESERVED
APPLE GREEN
ESD Mat
ESD Mat
A) Product Name
Apple Green ESD Mat
B) Raw Material :
NBR + Synthetic Rubber
C) Purpose
To prevent equipment damage resulted from triboelectric voltage of the static dissipative
D) Scope
Ideal for use for precision instrument , Pharmaceutical industries , circuit product line , hospitals , LCD screen product , workstations, Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Electronic Assembly, Electronic Warehousing, Circuit Assembly, Aerospace, CMOS chips , microprocessor , semiconductor , dish drivers .
E) Characteristics
1 ) The anti-static mat is made up of two layers , the apple green top layer ( hard ) is static dissipative and the bottom black layer ( soft ) in conductive .
2) Features :-
The anti static properties of mat are according with the relative requirements of SJ/T 10694-1996 .
The surface resistance of static dissipative layer ( 1.0 x 10e6 ~ 10e9 Ω )
The surface resistance of conductive layer ( Below 1.0 x 10e6 Ω )
Volume resistance ( 1.0 x 10e6 ~ 10e9 Ω )
Surface triboelectric voltage of the static dissipative material < 200 V
The time of static discharging below 100V should be less than 1 second .
3) Model No. : ESD2APL1X10S
4) Compliant to GB/T14437-97 .
5) RoHS compliant .
6) Top Layer Material : Apple Green ( NBR Rubber ) ,
Bottom Layer Material : Black ( Synthetic Rubber ).
7) Surface Resistivity :
a) Top ( 1.0 × 10 ⁷ ~ 1.0 × 10⁹ Ohms )
b) Bottom ( 1.0 × 10 ²~ 1.0 × 10 ⁶Ohms )
8) Hardness ( IRHD , Micro Hardness Tester Wallace )
a) Top Green Layer : 70 ± 5° ( Shore A )
b) Bottom Black layer : 50 ± 5° ( Shore A )
9) Overall Thickness : Minimum 2.00 mm
10) Surface Finishing : Glossy ( Shining )
F) Specification
1) Model No. : ESD2APL1X10S , ~2mm ( Thickness ) x 1,000mm ( 1m ) ( Width ) x 10,000mm ( 10m ) ( length ) / roll , weight around 30kgs / roll , Shining / Glossy Apple Green , SGS Test Report : CRSSA/190411625-CA09972
G) Rate Offer & Order
Disclaimer :
* Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us .
* Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us .
Model No. :
ESD2APL1X10S
ESD2APL1X10S
** The photograph may not clearly reflect the exact color as listed due to the camera, the lighting and other factors such as your screen settings, and color may vary slightly due to the color calibration of each individual monitor
